Control Using BlackTrax
Spacemap Go Help
BLACKTRAX is a real-time location tracking system. By tracking the location of a performer or other moving object, BLACKTRAX can synchronize the movement with the Spacemap Panner X and Y coordinates of a Spacemap. The BlackTrax Z coordinate is the Spacemap A/B percentage control for a channel when two Spacemaps are active. If the nodes of Spacemap A are connected to lateral loudspeakers and the nodes of Spacemap B are connected to overhead loudspeakers, the Z coordinate moves sound vertically in the space.
Spacemap Go RTTrPM Settings
To establish the connection between Spacemap Go and BLACKTRAX, enable the toggle in Spacemap Go > SETTINGS VIEW > EXTERNAL DEVICE CONNECTION > RTTrPM
When enabled, the RTTrPM parameters expand displaying additional parameters, enter appropriate values for the application:
- Port
- RTTrPM Dimensions
- Spacemap Dimensions
- Crossfade from Z
BlackTrax Settings
- In BLACKTRAX, open the RTTrPM Output window. The port number must be 24002 and the Target Address should be the IP address listed in Spacemap Go > SETTINGS > EXTERNAL DEVICE CONNECTION > SYSTEM IP CONFIGURATION.
- The Coordinate system in BLACKTRAX must be Stage (WYSYWYG), selected in the BLACKTRAX Stream Parameters window.
- The range in BLACKTRAX for the X, Y, and Z position should be between -10 (Min) and 10 (Max).